Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 3 × 2 × 6 in |
| Dual Temperature Control | Dual Temperature Control |
Related products
-
Motorsports Complete KitsDrag Pack System Complete
Download Instructions
COOLSHIRT Systems® introduces its new DRAGPACK System to help drivers go straight faster! Designed for Drag racers specifically, this complete kit comes with the newly designed DRAGPACK ice based cooler system, a Driver Cooling Vest, an 8 ft insulated hose, and a 7 hr. lithium battery with charger. Reaction times alone can be reduced by as much as 20% with only a 2% loss in hydration. The DRAGPACK system covers 30-40% of the body with cold water circulating through tubing designed to dissipate heat away from the body, in-turn, cooling the core.
Emergency pull release standard on all racing products.
*CAUTION*
Use only the manufacturer approved charger. Use of a non approved charger may result in battery failure, injury or fire. Do not short circuit the terminals. Do not disassemble the battery pack. Do not overcharge. Dispose of used batteries according to local government regulations
$1,006.00 – $1,070.00 Select options -
-
MotorsportsMotorsports Drain Kit
Download InstructionsSKU: 5006-0003
The COOLSHIRT drain kit is designed to make draining your shirt and/or cooler quick and easy. The kit comes with 2 female connectors and 1 male connector with roughly two feet of tubing.
To drain your garment just connect the female connectors to it and hang the garment to allow it to gravity drain. We recommend that you leave the female connectors in the shirt after it has drained for several hours to allow any excess moisture in the tubes to evaporate. If needed, you can blow a light stream or air (10psi or less) through the garment to aid in the draining process.
The male connector and tubing will allow you to plug into the cooler and pump the water out. We recommend that you leave the cooler lip open after pumping the cooler out to allow for any excess moisture to evaporate.
$38.00 Read more